On the third week, worked on the forks to see how much torque was needed to hold the ball if we went backwards and forwards. Secondly, we worked on the Tower to figure out the length of the arm and Ball support. Thirdly, we worked on the Cylinders and bumpers.
Next day, we worked on a mechanical parts list so we could figure out what we did and didn't need. A few weeks later, we got all the calculations for the hoop finished.
About a couple days later, we finished the fork lifts and determined how they will added to the robot. We also figured that the forks will be centered between the wheels and would be 26".
About a week later, we contemplated as to how the Arm and the hoop will be on the robot. It'll consist of a 12 to 13" long half hoop that is about 20" long.
On tuesday, we worked on yet another parts/inventory list. But this was for forklift and hoop, and tower.
second to lastly, the tool boxes were organized to make things a heck of a lot easier to get to.
Lastly, today, we fine-tuned everything to make sure that we had everything in perfect, working order.